It was reported on a Microsoft community forum last month by a random guy that he was unable to turn on his Surface Pro 4 device after he had mistakenly pressed the Power button to turn it off.

Sounds quite irrelevant, but that’s how many of the complaints regarding Surface Pro 4 are coming to the forefront currently on various forums.

Sometimes, this issue has been found to occur after a firmware update, or mostly after shutting down the system or charging it.

According to many users, it does not wake up or turn on after you put it to sleep.

So in short, the problem is surfacing in the same way but due to several varying reasons.

You cannot be sure about any particular cause, so we will give you certain fixes which will work for all the common causes generically.

Table of Contents:
Solutions:

• Perform Two Button Combination Reset
• Utilize Windows Key + P Shortcut
• Disconnect all Peripherals
• Wake up your Surface Pro 4 with Hotkeys
• Disconnect the Power Button and let the Battery Drain
• Plug -in Surface Pro 4 to a Different Power Outlet

Conclusion

Solution #1: Perform Two Button Combination Reset

The Microsoft team has come up with a quick solution to this issue by performing a two-button reset.

To pull it off, follow the guideline given below:

Step 1: Firstly, press and then hold the Power button for at least 30 seconds.

Step 2. Once the device is turned off, press the Volume Up button along with the Power button. Keep pressing for at least 15 to 20 seconds. The screen may display the spontaneous flashes of the Surface Pro logo, but don’t pay attention to it and keep pressing the buttons.

Step 3. Release the button after the designated time. And keep it undisturbed for few more seconds, for instance, 10 seconds.

Step 4. Press the power button once again and leave it. The device will be turned on.

This is usually the two-button resetting method.

If the device does not turn on this time, don’t despair. Follow the next solutions explained ahead.

Solution #2: Utilize Windows Key + P Shortcut

According to experts, your device might be running but in a different mode. That’s why it seems dead for the time being. Using this approach of “Windows Key + P” shortcut, the issue has been reported to be solved for many users.

So let’s give it a try here.

Just press the “Windows + P” keys together for some time, and see if it starts or not.

If it is still not starting, head on to the next method. Don’t waste your time on this trick.

Solution #3: Disconnect all Peripherals

According to some reliable sources, if you are unable to turn on your Surface Pro, you seriously need to disconnect all the peripherals attached to it. For instance, keyboard, external hard drives, power adapter, etc.

After disconnecting everything, keep pressing the power button for 2 to 3 minutes and release it for 30-40 seconds. Press it again for 5-10 minutes and your device is most likely to turn on at the end of these button-pressing sessions which I must admit is quite of a tedious job.

Still not working? Relax, there are still a few more tricks waiting up ahead.

Just don’t give up on it so easily.

Solution #4: Wake up your Surface Pro 4 with Hotkeys

This problem sometimes occurs when you put your Pro device to sleep. So using hotkeys on many occasions is said to have worked out.

To accomplish it, press the “Windows + Ctrl + Shift + B” keys combination on the keyboard.

In case you are using the device on tablet mode, press the Volume Up and Volume Down buttons also simultaneously three times without subsequently.

Hopefully, this should wake up your Surface Pro 4.

Solution #5: Disconnect the Power Button and let the Battery Drain

This is also a quick fix, which is said to be helpful for many users. Who knows, it might prove to be helpful for you as well.

So, disconnect the power adapter and let the battery drain out.

It may take a few minutes to a couple of hours, so just leave it undisturbed and attend to your other important tasks.

It would be best if you just leave the device for 24 hours to drain out completely.

Once it is fully drained out, connect it to the power adapter and check if the issue is sorted out or not.

If it is still not waking up, there is still one more trick to your availability.

Solution #6: Plug-in Surface Pro 4 to a Different Power Outlet

In a different way around, users have informed on various forums that this issue can be resolved by connecting the Surface Pro 4 to a different outlet.

So if it is waking up, plug in the device to a different power socket in your home and try to turn it on again.

Make sure that this new power outlet is not connected with other devices.

Although it is not a guaranteed solution, you can still try it out.

Conclusion:

If your device is still under warranty and none of the above-mentioned solutions seem to work in your favor, then you can submit your device to any nearby service center.

They have their special arrangements or tools to wake it up in a few seconds if it is a software issue. It could also be a hardware problem which the experts at the service center can easily fix.

If you are facing any other miscellaneous issues with your Surface Pro 4, tell us about it in the comment section below. We will try to revert to with guaranteed solutions if possible.

The post What To Do If Surface Pro 4 Does Not Turn On? appeared first on AndowMac.

If you know the settings better you can automate multiple actions even without uttering a single command.

However, setting up Alexa routines needs a certain level of creativity and accurate efforts. If the routine settings go wrong at any point, it will begin to trigger unwanted actions without your knowledge.

Why Use Alexa Routines Daily?

The simplest reply to this surreal query is that it makes your day better and convenient.

Wouldn’t you want to spend your entire day without having to bother about pity homely chores?

If you have artificial intelligence which can take over the control of all your daily basic tasks, wouldn’t that make you more efficient?

Of course, it would! You will now be able to focus on your indispensable works with more zeal.

You just set a task, then you can forget about it and relax. Alexa will remind you of the task at its designated time, that’s the beauty of it.

5 Commonly Tried Alexa Routines Explained

#1: Turn on a Playlist:

Suppose you are habituated to listen to a specific music track in a playlist. But you cannot right away recollect the playlist since there are so many in-store.

So you can do one thing. You can simply set an Alexa routine which will automatically turn on the chosen playlist. Just say, “Alexa, Playlist”.

You don’t have to mention the particulars of the playlist, that’s the relief. Isn’t it?

Even though you can manually play a Spotify playlist on Alexa or Pandora station on Alex, but setting the routine makes the job easier.

#2: Waking up Yourself Comfortably:

Just imagine, in the morning, Alexa slowly warms up the room with the lights coming on. Then Alexa starts brewing your morning coffee (all you need is a smart Alexa plug). And last but not least, it updates your news reports, weather, traffic, and calendar details to you.

All that without a single word spoken!

Isn’t that wonderful? Well, the truth is Alexa can perform many similar actions with routines.

#3: Schedule Task for Kids

Are you a busy parent with your restless kids around endowed with busy household duties? Then Alexa routines are a lifesaver.

With the routine settings, Alexa will remind your kids to wake up; go to school, finish their homework. It can even tell them stories, play them any song. Just announce your Kids name, and Alexa will do everything set in its routines.

#4: Make Someone Laugh:

Apart from scheduling tasks, Alexa can turn out to be a funny comrade as well.

The routines that you set often seems to be funnier than you expected.

#5: It Makes Look like You are Home to Someone When You are Not At Home

You can set a recurring Alexa routine that can play music on and off; set the room temperature to optimum level; turns the lights on and off.

So even when you are not home, and someone is about to visit your place, you can make them feel comfortable without being present in person.

How to Set up Alexa Routines in just 90 Seconds or Less?

Now once you know how effective and effortless your life becomes with Alexa Routines, it’s time to know how to do that.

Simply follow the steps articulated below:

Step 1. First of all, open up you’re Alexa app on your Smartphone.

Step 2. Now press the three-line hamburger icon from the upper left position.

Step 3. Next, from the sideway expanded panel, tap the “Routines” option.

Step 4. Tap the (+) icon from the top right corner of the phone screen to open up a fresh routine tab.

Step 5. Now; tap the “When this happens” option to trigger the routine activities and follow the on-screen instructions. For instance, you can set a routine at 6 pm when you say, ”Alexa I’m home”.

Step 6. Next tap the “Add Action” to set the exact task that should happen at your response.

The task could be turning on or off the lights; turning on the playlist, etc.

Step 7. Finally, tap the “Save” option from the upper right corner of the screen this time to set the routine in action.

How to Delete the Alexa Routine?

If you want to get rid of the incessant Alexa routines buzzing at your ear all the time, you can surely delete it.

Here is how you do it:

Step 1. Simply follow the steps 1-3 mentioned in the previous section of setting an Alexa routine.

Step 2. Now choose the routine you wish to update.

Step 3. Tap the three-dot icon at the upper right corner of the screen and then choose “Delete Routine”.

How to Update your Alexa Routines?

In case you want to edit your routines, like adding an extra action, surely it is possible.

Read the guideline below and you will know it:

Step 1. Tap the routine that you wish to update.

Step 2. To disable the routine, toggle off the “Enabled” option. It will then fade out and will show “Disabled” option.

Step 3. If you wish to change the trigger, like “Alexa I’m home”, tap the trigger. It will bring up a new tab where you can edit it.

Step 4. Now to remove an action, just long tap the (-) icon adjacent to the specific action, and it will automatically disappear.

How to Test Alexa Routine by Playing it?

Once you have set it all according to your plan, now it’s time to check how it sounds or works in real. Isn’t it?

So this is what you have to do:

Step 1. Open the routine tab the same way mentioned earlier above.

Step 2. Tap the particular routine you wish to check.

Step 3. Tap now the three-dot icon at the upper right corner of the tab and select “Play Routine” from the next blackout tab.

Now just relax! All that you needed to do is done by now.

When the time will come, Alexa routine will automate the task all by itself.

Conclusion:

Hopefully, you have enjoyed reading the article above. Just try to stick to the guidelines as exactly as explained since you are new to it.

One more thing to add while ending the discussion is that there is a feature called “Delay” feature. If you want to postpone or delay any particular Routine, you can use this feature according to your need.

Anyways, there are plenty of other tricks and trades to Alexa routines. The whole of it cannot be summarized in a single article. That is something you have to explore and figure out yourself. The more you use it, the deeper you will know its settings.

So enjoy and have fun with your Routines.

The post How to Use Alexa Routines To make Amazon Echo Work Smartly? appeared first on AndowMac.

1. When there is power outage, it is necessary to unplug your PC.
2. You can keep one light plugged in and in on position so that you will get an indication when the electricity comes back.
3. It is always better to have a backup of all the important files on an external USB drive so that they are lost if your PC gets damaged.
4. You can also install a barrier like surge protector which will protect your computer by reducing the sudden power surge.
5. You can also have a UPS which will give you enough time so that you can complete your routine of shut down and can shut your computer safely.

Ways to correct the damage done to your PC by power outage or surge are as follows:

• If your PC fails to start which means there are no indicative sounds or lights, then there can be two possibilities. First possibility is that your power supply is damaged. If your power supply is damaged, then you can replace that by yourself and PC will work as before.
• If your laptop is damaged then it is better that you take it to an expert for damage control.

• If your PC is working intermittently, then it can be a problem of motherboard or a small chance that the CMOS information is scrambled. To correct this you can remove the small battery on motherboard. Insert it after five minutes and restart your PC.
• If the problem still persists, it means that your motherboard is damaged. In that case you have two options. Either you can buy an identical motherboard and your computer will work as before or you can opt for purchasing a new computer.
• If your PC starts but there is only a BIOS screen or a curser which is blinking or only an error message, then it means the SSD or internal hard disk is damaged. You will have to replace the drive and reinstall your programs and operating system.

As you can see that the damage to PC can be controlled easily if you know what to do. But it is always better to take precautions so that the PC is not damaged in the first place.

The post What measures to take if your PC is damaged due to power outage or surge? appeared first on AndowMac.

Turning your crawling computer into a speedy one is an effortless and worthwhile update.

Today’s generation is getting very familiar with the new buzzing technologies. And riding the computer is the now amongst the best thing they can do. With computer came the flood of software. At present the software like Photoshop, Skype, Drop box, Web browsers like Chrome, Gaming software and a lot more are must for the users. These software runs on Random Access Memory while in process.

Earlier PC’s use to have maximum 2GB to 4GB of RAM, which makes computer hectic to work with if to-many software ran on a single time. If keep on doing the same, with a regular score it will make your PC, creep.

If you feel that this is the story of your PC as well, and then please be informed, your PC is telling you to increase its RAM. 4GB is what we can recommend if the PC is performing very gentle tasks, but we will advise a RAM of 8GB if you are using quit heavy software, though 16GB is the superlative option.

A lot types of RAM’s are there in the market like the latest PC’s use DDR4, wherein DDR3 is what is in, the older versions even use DDR2 and DDR. Soon the market will get standardized into DDR4 however; DDR3 rules market today.

In the market you will find RAM’s different brands like Kingston, Super Talent, G.Skill, Corsair, PNY and all the others. While selecting a brand you should keep in mind the design of RAM’s heat sink. Chose the best composition and of course the one soothing your pocket. Wherein, all the known names in the Manufacturing of RAM deliver an exceptional product.

The other important think to be considered is the speed and memory kit capacity of the RAM. For DDR3 RAM the clock speed should be from 1600HZ to 1866HZ.

Let’s make a choice of 8GB of DDR3 RAM now the question is how to install this new Random Access Memory in your Personal Computer. It quite a trouble-free task of few steps.

How to install new memory in your Personal Computer:

Step 1: Shut down the PC and remove all the connected cables. Now take out the motherboard by removing the side of the PC’s case.

Step 2: Next to a big heat sink you will see 4 memory slots. RAM slots are just near to CPU socket.

Step 3: Now remove the older Ram by removing the plastic latch aside of it. On the other hand you can remove any dust on the RAM slot if there.

Step 4: Now place the new RAM in the slot with a close look so that every small socket in the RAM get filled with the slots or you can even read the Motherboard manual. Now lock the RAM with the plastic latch.

Step 5: Now close the computer case, reconnect all the cables and switch on your PC. Sometimes the system takes few restarts to address your newly introduced memory, so keep it calm. Restart the PC and enjoy the 8GB DDR3 RAM.

Follow the same steps for different types of RAMs.

The post How to install new memory in your PC appeared first on AndowMac.

On your Desktop PC you want to upload photos or see scores on the ESPN.com. And for kid’s you have to build a Kid’s Desktop PC to improve their computer skills. The components of the kid’s PC are very inexpensive except the motherboard. The motherboard is easily upgraded into a new kid’s CPU with a little more power. The motherboard GA-P55-UD6 is of GB and has socket 1156 which would handle the CPU. The new CPU’s are Intel Core i3, i5, i7etc. The advantages of the motherboard are DDR3 speed Memory, PCI slots, 10 USB ports includes 2 USB ports along with the Ethernet, audio ports and the optical ports. For the kids CPU, Intel Core i3 is much better and inexpensive compared with the Intel Core i5 and i7. To build a Kid’s Desktop PC is very simple and inexpensive at $89 only. The parts and the prices of each part are as follows:-

1). Case: Red color race car case is $69.00

2). CPU: i3-530 Intel Core CPU is $113

3). Motherboard: GA-P55-UD6 is $230

4).Graphics Card: HD 5450 is $50

5).Optical Drive: On 24X Internal Drive is $38.99

6). Memory Card: Corsair 4GB is $119

7). Operating System: MS Windows 7 is $199.99

8). Hard Disk: WD Caviar 7200rpm is $40

9). Learning Keyboard: $29.95

The following steps are used to build a kid’s Desktop PC are:-

Step1 Open side case and on the flat surface set that case.

Step2 Now, insert or set the motherboard.

Step3 Then, install the CPU and move the socket lever sidewise, then increase it up to 90     degree. Slightly, streak up the chip and take lever down and CPU is held then locked it.

Step4 On the Chip placed a blob of paste then it conducts heat and raise cooling by   filling spaces between the heat sink and the CPU.

Step5 On the top of the CPU install the Cooler or fan and trim it on the motherboard.

Step6 After that insert RAM. According to your Memory you can use memory slots. Once the RAM components are connected then you cannot put again.

Step7 Power supply is installed.

Step8 Place the motherboard and screwed it tight.

Step9 Take the transitory face plates from the front panel case.

Step10 Install the Hard Disk (HD) and graphics card.

Step11 In the front of the case, slide the optical disk.

Step12 All the hardware is installed then starts wiring. On the motherboard there are 20 pins sockets and connected with the power supply. There are four pin sockets in the CPU also connected with power socket. Now connects all the wires with the external port of the USB also with the display status, lights and the jack audio to the motherboard. Connect this entire thing with internal disk also.

Step13 Finally, all the hardware is successfully done or assembles. Then you are ready to install the operating system like Window XP or window 7 and use them.

The post How to build a Kid’s Desktop PC appeared first on AndowMac.

The concept works only when there is possibility to install two drives in single computer system. Usually, we find this option only in laptops with wider memory. In exceptional cases some of the laptops that are affordable also successful supports the 2.5-inch hard drive/SSD. This is not the end; they also have an option to support the flash-only mSATA. Further, the makers of personal computers fill up the gaps depending on what exactly need to be purchased. Still there remains an option for the user to and then successfully run the hard drive, now what if the users have an old laptop comprising of single device that successfully supports only one hard drive. Let’s have a look on some of the solutions that will resolve the problem statement.

Two-in-One Hybrid Drive

Most of the people are not aware of the fact that devices, such as  Western Digital’s WD Black uses two big drives, one is SSD and an another hard drive. They put this in one container along with a SATA connector. This makes an ultimate combination because finally user gets a system that has both speed as well as mass storage at once. However, there are some limitations that are being associated with it, firstly the hybrid encounters constant problems and secondly it requires some software setup for proper functioning.

Cached Hybrid Drive

As most of us are familiar with 2 in 1 devices, theses drives also work in the similar manner i.e. combines two different technologies and work with the combination obtained. The difference lies in the way these techniques are used or employed. In some drives flash RAM is used a cache to speed up the hard drive, this is so because they are consider as a single drive by both PCs and windows.

Internal SSD and External Hard Drive

This is supposed to be the cheapest and the convenient solution. On the contrary, it is also one of the slowest solutions. Simply install SSD, put together windows, programs and required data. Rest everything is transferred to the external drive.

Network Storage

One can also buy network attached storage and install them in one or multiple hard drives and then connect it through the router. This way users can access their files on their own network that to in minimum time and with convenience.

Large SSD

This is the most expensive option because SSD cost somewhere between $300 for 960GB. However, at the same time this is the simplest and fastest option that one can opt for.

The post Five ways to add SSD speed to your laptop without losing storage capacity appeared first on AndowMac.

But, just by following some simple and easy steps, the lifespan of SSDs card is going to be increased. Fortunately, these steps are very tiny and simple as well. So, it is much better to avoid unnecessary writing. This can easily be done by tuning off some Windows settings.

Visual Memory

If there is more than one program running on your computer, which is absolutely fit in the physical Ram then Windows swaps some of those programs that are running simultaneously to the internal drive.

Hibernations

A trickle of energy is going t be consumed when the Window Pc is put on the energy-saving sleeping mode. So, one of the best ways that you can go for is hibernation. Then it is hibernated, it shut down the hardware entirely.

There is one thing that you should be aware about it. Hibernation copies everything in RAM into the C drive that sometimes results in wearing out the SSDs.

To be safe and secure, you can disable hibernation. If you are Windows 8 user then you need not to worry about anything! In Windows 8, the option of hibernation is disabled by default. But, if you are a Windows 7 user then you can disable the hibernation option by simply following the Microsoft instructions.

Superfetch

Superfetch is nothing, but just a Windows feature, which is supposed to improve performance and nothing else. It actually damages the SSDs and reduces the lifespan of the SSDs as well.

So, to improve the lifespan of SSDs, it is much better to disable this feature called Superfetch. To disable Superfetch, the only thing that you have to do is to follow some steps. The steps are very easy and simple. Here are the steps:

• Search and then select service in the resulting open Service window.
• In the next step, you have to scroll down.
• In the next step, double click on super fetch.
• Go to Start Up type menu and then select the Disabled option.

In this way, you can disable Superfetch feature and increases the lifespan of your SSDs card.

Defragged

Fragmentation even worse the situation and also reduces the lifespan of the SSDs card. So, defragged is one of the best ways to improve the lifespan of SSDs card. In Windows 7, click the Start button then go to disk defrag or type disk defrag and then go and Select Disk Defragmenter.

So, these are some of the easy and simple ways that helps you to maximize the lifespan of the SSDs card. The only thing that is required is to follow these steps rigorously and improves the utility of your SSDs card.

Hope you find this post useful and interesting!

The post Maximize your SSD’s lifespan with the right Maintenance appeared first on AndowMac.

Have a read!

• Remove the laptop battery and unplugged the laptop from the adaptor as well.
• Try to find out round cover stickers, which are used to hide the screen on the screen bezel. The round cover stickers are usually found on the bottom of the screen bezel, which is near the screen hinges.
• Remove the cover stickers with the help of pointy or sharp object. You can either use safety pin or needle for this purpose. Make sure, there will be no damaged on the laptop screen. Place the pointed object between the bezel and the edge of the cover, and then try to pry the sticker away. Once the sticker is removed properly, keep the cover in a place which is safe. Always make sure the cover should not be placed from the sticky side.
• To remove the now-exposed screws, you can use screwdrivers. Always make sure you remove the screen in a right position so that screws get enough exposure to remove properly.
• Now, it’s time to pry screen bezel always, which is placed in the back side of the screen. You can use your fingernail as well as other pointed and sharp objects to crack the screen from outside. Plastic snaps are usually used to secure the screen bezel. So it is necessary to exert some force during prying.
• It is not always easy to remove screen bezel. Sometimes, you need to do extra effort for effective removing of screen bezel.
• Once the screen bezel is properly unsnapped and the bezel is removed in an effective way, LCD is found. It is secured in a metal trim frame on the right as well as left sides. There are two screws on the top of each side. Remove it properly by holding the trim frame pieces, which is placed on the back screen case. Make sure that LCD should be lifted properly from the back screen case.
• If there are any screws on the trim frame sides, move all those screws gently. In most of the laptops, there are usually three to four screws, whereas in small laptops there are only two screws. In some laptops, tape can also be used for securing the LCD.
• Now remove the video cable, which is placed on the back side of the screen. Never put excessive pressure for removing. Remove the video cable away from the screen gently.
• Once the broken LCD is removed properly, place the new LCD similar to the place as that of the old LCD. Reattach the video cable on the back side of the screen, just like on old LCD screen.
• Now, fix the new bezel in the place of old bezel by following the same process.

If all go well, you will get shinny and new laptop screen in just a few minutes.

Hope you find this post useful!

Checkout the latest pink laptops deals.

The post How to Replace a Broken Laptop Screen appeared first on AndowMac.

Time has gone when Ethernet cable was piped into the walls of your room to pass on the strong bandwidth for internet access and watching movies on your TV. Wireless transfer of data and signals has done wonders to the latest entertainment technology which must be installed in your home to build an efficient home entertainment network. Current wireless networks are capable of handling every type of music, files, movies and TV programs that make your kids happy and pleased. There are only few things or equipments which need to be installed in your home in tandem with the PC connections and network router. You will have to follow the following steps that are mentioned below in order to build a genuine and capable home entertainment network.

Network Router

One of the essential components that need to be installed at the initial stage is the network router which will transmit the signals of required bandwidth. Of course, it will greatly depend on the operations you need through the network router which will define the allocations of bandwidth for television programs and internet access. At the same time, you will have to invest your time and energy in looking for the dual-bandwidth network router such as of D-Link, Linksys, Netgear or any other router which offers different bandwidth allocation of 2.5 GHz and 5 GHz for different home operations like programming on TV or accessing the internet. This type of router is always preferred because it helps to stream HD videos, music and movies with good range, speed and bandwidth allocation.

If you might like to know How to share wireless connection in windows 7

Installing wireless network bridge

Well, you need to buy wireless network bridge for extending the networking signals without wires given your home is quite vast and rooms are located remotely. Such a network bridge will establish network connection to any type of hardware which is not compatible with wireless connection. This equipment comes with electrical sockets that can be fit into your walls which will further allow you to insert adapters for ensuring interruption-free network connection.

Look for excellent and vast media storage facility

Although it is quite possible to store all the files of music, movies and other things on the hard disc of your personal computer but it is much better and convenient to get all those files stored an any external media storage device. There is no denying the fact that this device will allow you to access every type of files. Such type of device comes with the facility of network-attached storage which is centrally installed for access of all files and thus; it will also save plenty of space on your hard drive of PC.

Connection of TV

The ultimate and final thing which needs to be done while building a home entertainment network is to connect your TV to the wireless system which will automatically retrieve the music or video files from the central storage device. And, what else you need now is to play your TV even in the kitchen or living room and juts enjoy your family!

The post How to Build a Home Entertainment Network appeared first on AndowMac.

Recently, we have talked about How to fix missing or corrupt files in PC. Now let us discuss how can you fix up a slow performing computer.

When performance speed of system gets slower, it does not mean that you need a new computer rather than fixing this issue with normal solutions can work more effectively. Slow system run is a common problem these days and this can happen because of several reasons. It does not matter whether you have downloaded any malicious software or used your system with utmost care or caution; slow system run is a prevalent computer problem. In other cases, incorrect installation of certain programs may also affect the functioning and performance of desktop. When we use our system for a long time without using cleanup actions, it will automatically store credentials, data, entries and temp files that slow down the overall performance of your system.

• Antivirus Software check and update – The antivirus software or program helps the user to protect the system from malware, viruses and malicious software. Slow running of the system may also happen because of malware which must be scanned thoroughly and eliminated quickly. You are required to run a full system scan and keep the software updated on regular intervals.
• Remove unwanted files from disks – Storing more and repeated files will certainly cause performance problems for which you need to remove these unwanted and unused files so that everything runs properly. For this, you should make use of Disk Cleanup in Windows.
• Registry Repair – All the registry files are stored in the Windows Registry section which may get disorganized or corrupt due to altered or missing files that will certainly take toll on overall performance and computer speed. You can easily repair your registry files that have gone corrupt by running an authentic and reliable registry scanner that will fix the problems.
• Rebooting system – Sometimes, simply restarting the system might work wonders as a result of which your system will work faster. Yes, this happen because of running of programs in the background due to which computer slows down. Make it sure that startup programs and TSRs are disabled or removed which starts automatically when your computer gets booted. On the other hand, antivirus software running in the background might also slow the computer.
• Windows and drivers updates – Applications may run slow on the computer if the browser plug-ins or the Windows OS are not updated. You should ensure that both these things including that of the video driver are updated regularly.
• Overheating of processor or computer – It should be noted here that excessive heating of the computer parts and processor will decrease the performance of the system. Cleaning your system for dirt and dust can be a useful step to allow smooth air flow for cooling down the system.
• Issues related to hardware components – If each of the above mentioned recommendations fails to deliver results, you should focus more on the issues related to hardware components that might have failed down or gone bad. Such an issue might infect RAM, motherboard, CPU, hard drive or any other essential hardware component which needs quick replacement.

The post How To Fix Up A Slow Performing Computer appeared first on AndowMac.