Follow The Below Easy Steps.

Step 1: Open Notepad and Paste the Below Code.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPTION\System\CentralProcessor\0]
“ProcessorNameString”=”Your Processor Name 50000MHz”

Note : Change “Your Processor Name” To Whatever name You Want it To Give. Also Understand That \0 Should Be Present If Windows Stores your Processor name at that location. I recommend you better open Register edit by typing “Regedit” in Run Command and Navigate To above keys To Confirm It is Present.

The post How to Change Your Processor Name Permanently appeared first on AndowMac.

Normally if we need information in text format from images, we have to type it all. But instead of doing all the typing you can use Optical Character Recognition (OCR) Software to extract all the text from an image.
OCR recognize The Handwritten or Printed or Typewritten Text and Convert them into Editable Word or Text format. Although the Output may not be 100% accurate and you need to do some editing work.
But its always better to do some editing instead or Typing Whole Document.

The post How to Extract Text From Images. appeared first on AndowMac.

Set wshshell = wscript.CreateObject(“WScript.Shell”)
Wshshell.run “Notepad”
wscript.sleep 400
wshshell.sendkeys “C”
wscript.sleep 100
wshshell.sendkeys “O”
wscript.sleep 120
wshshell.sendkeys “M”
wscript.sleep 200
wshshell.sendkeys “P”
wscript.sleep 100
wshshell.sendkeys “U”
wscript.sleep 140
wshshell.sendkeys “T”
wscript.sleep 100
wshshell.sendkeys “E”
wscript.sleep 50
wshshell.sendkeys “R”
wscript.sleep 120
wshshell.sendkeys ” “
wscript.sleep 170
wshshell.sendkeys “F”
wscript.sleep 200
wshshell.sendkeys “R”
wscript.sleep 100
wshshell.sendkeys “E”
wscript.sleep 50
wshshell.sendkeys “A”
wscript.sleep 120
wshshell.sendkeys “K”
wscript.sleep 160
wshshell.sendkeys “S”
wscript.sleep 200
wshshell.sendkeys “/”
wscript.sleep 100
wshshell.sendkeys “G”
wscript.sleep 100
wshshell.sendkeys “E”
wscript.sleep 100
wshshell.sendkeys “E”
wscript.sleep 100
wshshell.sendkeys “K”
wscript.sleep 100
wshshell.sendkeys “O”
wscript.sleep 100
wshshell.sendkeys “F”
wscript.sleep 100
wshshell.sendkeys “R”
wscript.sleep 100
wshshell.sendkeys “E”
wscript.sleep 100
wshshell.sendkeys “A”
wscript.sleep 100
wshshell.sendkeys “K”
wscript.sleep 100
wshshell.sendkeys “.”
wscript.sleep 100
wshshell.sendkeys “C”
wscript.sleep 100
wshshell.sendkeys “O”
wscript.sleep 100
wshshell.sendkeys “M”
wscript.sleep 100

The post Notepad Types Automatically- Ghost Typing. appeared first on AndowMac.

Hello everyone, Today we will see how to create password protected Folders without software.
Securing personal files/softwares cannot be guaranteed in a situation whereby more than one person is permitted to make use of a computer.

In this case,it is very necessary to ensure all sensitive/personal documents are kept hidden from the view of such users.But how can you do that without a software?

Well,here’s an easy way to it.
So,if you think there’s a file/folder you’d like to keep hidden from the reach of others,just follow the steps below.

How To Secure Files/Folders Without Software

Create a new folder and create a new ‘Text Document’ in it by right-clicking and selecting ‘New’ » ‘Text document’.
Copy – Paste the following code snippet in the text document

Locate `Password here` in the code above and change it to whatever password you want to use (Simple to remember,but hard for others to guess)

Now click on File » Save as and give it any name you so desire but with a .bat extension.
E.g : Lock.bat

Now,exit notepad and on getting to the new folder you created previously, you’ll see a “LOCKER” command.

Double-click on this file and a new folder will appear (Private OR Confidential)
Now,copy/move all you want to hide in this “Private/Confidential” folder and go back one step.
Double-click on the “LOCKER” command again and you’ll be greeted with something new.
Just press ‘Y’ as instructed and hit enter.

Immediately,the ‘PRIVATE / CONFIDENTIAL’ folder will disappear.Now,all your files & documents are secured in this hidden folder.

To undo hiding,double-click on this “Locker” command again and input the password you used above. Hit Enter and the hidden folder will re-appear..Now,that’s it.

NOTE:These files can still be sometimes accessed using the search,so it is highly recommended you rename your files before hiding them so as to ensure its maximum security.

If you think this article is usefull to you plz share it,tweet about it, click g+1

Thank you

Also Check :

• Hide files And Folders With CMD in a Way that no one Can even Search it
• Make Your Notepad Type Automatically- Ghost Typing
• How to Change Your Prcessor Name Permanently

The post How To Create Password-Protected Folders Without Using A Software. appeared first on AndowMac.

Click on Start. 

Replace Username with your own name.

Dont forget to recommend us on google, plz g+1

The post Make Windows Greet you with a Custom Voice Message at Startup appeared first on AndowMac.

The main functioning of Antivirus is to detect and remove harmful or unwanted files which may slowdown your computer and windows. But if you don’t have enough time to download any best antivirus. Then simply use this trick to make your own antivirus.This antivirus scan by using command prompt and delete unwanted files automatically.

Open your Notepad and paste this given code
@echo off
title Antivirus
echo Antivirus
echo created by your name
:start
IF EXIST virus.bat goto infected
IF NOT EXIST virus.bat goto clean
cd C:\Windows\system32
:infected
echo WARNING VIRUS DETECTED!
del virus.bat
pause
goto start
:clean
echo System secure!
pause
exit
Now save your file with Computerfreaks.bat and select “All files”

The post Simple Steps To make your own Antivirus. appeared first on AndowMac.